Audia Flight FLS 9 Fully Balanced Stereo Integrated Amplifier

Founded in 1996 by Massimiliano Marzi and Andrea Nardini, Audia Flight designs and manufactures in Italy the finest high quality home audio components. 
All Audia Flight products are entirely handcrafted at our facility located in the town of Civitavecchia, near the Mediterranean Sea and just over 70 kilometers from Rome.



The FLS 9 is our latest creation in hi-end integrated amplifiers and is the best choice for a mid priced hi-end integrated amplifier.

It shares with FLS 1 model same fully balanced preamplifier stage boards. Power channels use 12 highly selected power devices, 8 power supply circuits with extra low impedance and very low noise, high quality capacitors (120.000 uF), special printed boards with extra thick copper layer, 1000 W shielded audio toroidal transformer. The150 Wrms (8 ohm) output power follows the acclaimed Audia tradition of speed, power, driving capability and control ability. The FLS 9 is also suitable for less efficient, impedance critical (down to 2 ohm) loudspeaker systems. The aluminum chassis, with engraved “Audia Flight” logo on top cover, and solid aluminum milled remote control are brushed and anodized. It possible to install two optional cards, plug and play, very easy to install in separate slots externally accessible.

The elegant chassis is full brushed aluminum with engraved logo on top cover, the large display is OLED blue. Four special composite pads with NBR rubber spheres ensure the best vibration control. An aluminum brushed and anodized remote control is also supplied as standard.

FLS 9 is available in silver and black finish.

Optional cards:

-MM and MC unbalanced inputs phono board

-RCA board (2 RCA additional inputs)

-DAC board. One asynchronous USB input (with Galvanic isolation) 32 bit 384KHz and DSD 512. Four digital inputs (2x optical, 1x AES/EBU, 1x SPDIF) 32bit, 192KHz (with Galvanic isolation)

Technical Data

Output power per channel Wrms: 150/290/500 (8/4/2 ohm) 

Inputs: 3 unbalanced (RCA), 2 balanced (XLR)

Outputs: 1 unbalanced (RCA), 1 balanced (XLR), 1 REC unbalanced (RCA)

Gain range: -90dB / +10dB

Gain resolution: 0,5dB

Frequency response (-3dB): 0,3 Hz ÷ 500 KHz

THD: < 0,05 %

S/N Ratio: 110 dB

Input impedance: 47 Kohm

Damping factor (on 8 ohm): > 500

Main voltage AC (50-60Hz): 100, 110-115, 220-230, 240 V

Stand-by power consumption: less than 1 W

Power consumption (150W RMS @ 8 Ohm both channels): 650W

Dimensions and weight: 450x150x440mm (W x H x D) – 25.5 kg

Shipping dimensions and weight: 570x280x560mm (W x H x D) - 31kg