Audioquest Niagara 1200 Power Conditioner
Unlock Your System’s True Potential: Hear the System You Never Knew You Had!
WHAT IS A POWER CONDITIONER AND WHY IS IT NECESSARY?
For some, a power conditioner is merely a device that provides enough outlets for the entire audio/video system while also protecting the connected devices from electrical storms and wiring faults. Yet, for the discriminating listener, many power conditioners can make an audio/video system perform far worse.
Yes, a home or building may have dimming lights or an occasional brown-out, and the utilities’ AC sine wave is always far from perfect. However, where incoming power is concerned, there are two reasons an audio/video system does not perform up to its full potential:
1) The current transients that supply the power amplifier are compressed, and
2) The ever-increasing levels of radio-frequency noise are masking (covering up) the system’s low-level signal content.
When compared to or measured against a Niagara Low-Z Power Noise-Dissipation System, a simple power bar or a dedicated AC wall outlet can lose up to a third of the low-level audio information that contain much of a recording’s harmonics, imaging, high frequencies, and bottom-end grip—and once that information is gone, it’s gone forever.
The products in AudioQuest’s Niagara Series are meticulously handcrafted, and their technologies are unique amongst all power products—whether they’re isolation transformers, AC regenerators, battery backup devices, re-clocking devices, or other types. Far surpassing most other technologies that cover only a narrow range of noise frequencies and do nothing to address the increasingly prevalent noise on AC ground, Niagara’s Level-X and patented Ground-Noise Dissipation (GND) Technology work evenly, or linearly, across a far wider range of induced noise frequencies.
Additionally, Niagaras 3000, 5000, and 7000 feature Transient Power Correction, which supplies a current reservoir to greatly bolster the performance of any power amplifier.
With an AudioQuest Niagara Low-Z Power Noise-Dissipation System, music lovers can finally experience the clarity, dimensionality, frequency extension, dynamic contrast, and grip their A/V systems have been capable of delivering—if only the power had been right!
Niagara Noise-Dissipation Systems do not ship with an AC cable. Why?
The cable that feeds any power product is the most important AC cable in the audio/video system. For any power product to maximize its ability to dissipate noise, the attached AC cables must be Direction-Controlled to drain induced radio-frequency noise. AudioQuest AC cables include ZERO-Tech for uncompressed current transfer and optimal Noise-Dissipation. Further, our patented GND-Tech (Ground-Noise Dissipation) pulls RF noise out of any product it’s attached to.
When partnered with a Niagara power product, our Direction-Controlled AC cables create a complete Noise-Dissipation System, ensuring the most effective and efficient dissipation of RF noise.
We allow our customers to select the appropriate length of cable for their systems and to decide how completely they’d like to optimize their Niagaras.
Low-Z Power | Noise-Dissipation System
Redefining the Science of Power Conditioning
- 7 AC outlets: 2 High-Current; 5 Linear Filtered
- Patented Ground Noise-Dissipation System: All outlets: 2 banks of direction-controlled ground noise-dissipation
- Direction-Controlled Ultra-Low-Resistance Solid-Core Wiring
- Ultra-Linear AudioQuest AC RF Filtering Capacitors
- Linear Noise-Dissipation Technology: More than 18 octaves of AC differential filtering with linear response, optimized for varying line and load impedance
- Non-Sacrificial Surge Protection: Withstands multiple AC surges and spikes up to 6000V/3000A without sustaining damage
- Over-Voltage Shutdown with Automatic Reset
- Low-Z (low impedance) NRG Series Silver/Beryllium AC Power Inlets and Outlets
Niagara 1200 brings the benefits of highly optimized power management to far more music lovers and replaces the amazingly well-received Niagara 1000.
The most obvious difference between the Niagaras 1000 and 1200, other than the 1200’s gorgeous textured bright finish, are the more universally useful shape and surprisingly substantial weight. The 1200 can now sit on a shelf like a component, with all the in and out cables in the back. It can be used ‘face’ down with the outlets in the air, fitting much better in the space between furniture and the wall. And, the 1200 is designed to stand on one end. 100% of the performance in a more useful package – and still only $1295!
Designed by Garth Powell, the Niagara 1200 embodies the very same design philosophy and incorporates the same patented technology found in its larger siblings, the Niagara 5000 and Niagara 7000, but packs it into a smaller, sleeker enclosure—at a fraction of the price.
Much like the Niagara 5000 and 7000, the Niagara 1200 uses ultra-low resistance solid-core wiring optimized for low-noise directionality, capacitor forming technologies that vastly improve linearity and minimize distortion, and low-impedance AC inlet and outlet contacts with heavy silver plating over high-purity Beryllium Copper for superior noise dissipation. Similarly, Niagara 1200 features our non-sacrificial surge protection, patented Ground Noise-Dissipation technology, and over-voltage shutdown. The Niagara 1200’s non-sacrificial protection circuits ensure that your system is thoroughly protected from AC surges and spikes, and the Niagara 1200 protects itself—no damage, no down time. Set it and forget it.
The Niagara 1200 employs AudioQuest’s patented Ground-Noise Dissipation System and Linear Noise-Dissipation Technology and fits seven high-performance outlets into its sleek cabinet-friendly chassis. Input current maximum capacity is 15 amps RMS in the 1200.
* Available in US model only